Hot Water Sewer Jetters

• Triplex plunger pump with ceramic plungers and stainless steel valves.
• 400' x 1/2' Hose on a 12 VDC electric reel (this hose is used for cold water jetting)
• 250' x 3/8" Hose on Manual Reel used for hot water jetting.
• Water Tank with run dry shutdown switch.
• 2" Hydrant Fill.
• 2500 watt on board generator.
• Trailer with Powder Coat Finish,7000# axle, 15" Chrome Wheels, 6 bolt hubs and brakes.
• 2 Nozzle sets with box and tip cleaner, one for the 3/8" jet hose and one for the 1/2" jet hose.
• Pressure gauge and Thermal Relief Valve.
• Lockable tool boxes, front and rear.
• Tool box with gloves and face shield.
• Power Pulse Valve.
• Remote Throttle control.
• Hour Meter.
• Safety Vest and safety cone holder.
• Strobe light with 5' extension.
• Measures 156" Long x 72" Wide x 64" High.
• Schedule 80 coil with Stainless Steel cold wrap.
• Burner runs on kerosene or diesel fuel and provides hot water for the 3/8" drain line.
• 50' of high pressure hose with gun wand assembly and 15° spray nozzle for rinse down

Features:

• Operating Pressure in psi/bar : 2500 / 172.5
• Flow Rate in gpm/lpm : 11 / 41.8
• Pump Thermal Protection : Mechanical
• Maximum Pump Inlet Water Temperature : 140° F
• Hose Dimension : 400' x 1/2" & 3/8 x 250'
• Engine Fuel Tank Capacity : 8 Gallon
• Burner Fuel Tank Capacity : 8 Gallon
• Burner Fuel Type : #1, #2 Diesel or Kerosene
• Water Tank Capacity in U.U. Gallons : 300
• Jetter Hose Reel Type : 12 VDC

Ordering Information - FREE Shipping